Por favor utiliza este link para citar o compartir este documento: http://repositoriodigital.academica.mx/jspui/handle/987654321/183828
Título: Design of UWB Notch Filter Using CRLH Metamaterials
Palabras clave: Ingeniería
CRLH
metamaterial
IDC
notch filter
UWB
Editorial: Instituto Politécnico Nacional
Descripción: In this paper, we propose a stop-band notch filter, which rejects the narrow frequency band of the Wi-MAX 802.16d (3.4 GHz to 3.6 GHz) and keeps the remaining UWB spectrum (3.1- 3.4 and 3.6-3.9 GHz) unchanged. The proposed filter has been realized using the metamaterial technology based on the CRLH metamaterial structures. The selected center operating frequency is 3.5 GHz, which is the mid-band frequency for the Wi-MAX. The obtained results have shown that the 3-dB notch bandwidth is about 200 MHz frequency band which extends from 3.4 to 3.6 GHz. The filter has been designed, simulated, optimized and fabricated using conventional MICs technologies. The simulation and the measurement results have been compared. The insertion loss shows 29 dB at the frequency of interest. The comparison reveals good agreement between the simulated and the measured results.
Other Identifiers: http://www.redalyc.org/articulo.oa?id=61428315003
Aparece en las Colecciones:Científica

Archivos de este documento:
No hay archivos asociados a este documento.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.